Fiber laser cutting machines are a vital tool in many industries, allowing for precision cuts in various materials. Proper daily maintenance is essential to ensure the longevity and accuracy of a fiber laser cutting machine.
1. Lubricating oil for linear guide
Metal laser cutting machine, fiber laser cutting machine and metal laser cutting machine use for a period of time, engraving, cutting smoke, dust has a corrosive effect on the guide rail, so regular maintenance of the guide rail.The critical power supply of the metal laser cutting machine is used to clean the clean soft cloth guide rail, and then drop lubricating oil on the guide rail. After oil, let the slider roll back and forth in the guide rail to ensure that the lubricating oil enters the inside of the slider.After oil, let the slider roll back and forth in the guide rail, then we must first install the guide rail, pay attention to install the guide rail do not first fixed, to install all the fixing nails, maintain the level, in the belt and the slider fixed, and then install the lens, dimming the direction of the road is completed.
2. Mirror and focusing mirror wipe:
Metal laser cutting machine, fiber laser cutting machine after a period of time, the smoke will adhere to the surface of the lens, affect the engraving, cutting depth, will also affect the engraving, cutting accuracy.Generally in a week or so with anhydrous sprinkle essence will be three pieces of mirror, a focusing mirror carefully wipe clean.
3. Oiling of bearings:
fiber laser cutting machine uses a large number of bearings, in order to ensure good cutting, engraving effect, some bearings need to be regularly oiled,· wipe off the dirt on the bearings with a clean soft cloth, use a needle tube to suck oil into the needle tube, and then slowly inject the bearing with a needle, slowly turn the bearing when the oil is injected.
4. Tightening adjustment of synchronous belt (belt) :
There are several synchronous belts in the transmission system of laser cutting machine. If the synchronous belt is too loose, the engraved font will appear double. If the synchronous belt is too tight, the synchronous belt will cause wear.After using for a period of time, please adjust the tensioning screw of the synchronous belt, the synchronous belt will be adjusted to the appropriate tightness, the carving text does not appear double, and the metal laser cutting machine, laser cutting machine running noise is very low, or consult the manufacturer’s technical personnel.
5 laser tube maintenance:
fiber laser cutting machine for laser tube is the use of circulating water cooling, use for a long time, the tube there will be some white scale, we can in the circulating water add a little vinegar, will pipe water to remove, and then use clean water to loop flush clean inside the laser tube, laser tube will be in the best working state, the life will be extended in the process of metal cutting cutting machine use, for safety protection, in order to efficient production, important thing is the daily security equipment maintenance.It can not only prolong the service life of the fiber laser cutting machine, but also always maintain and improve the processing quality of the production mouth, and finally achieve stable and high benefits
6.we will discuss the steps necessary for proper daily maintenance of a fiber laser cutting machine.
Clean the machine: Fiber laser cutting machines produce a lot of debris, which can accumulate on the machine’s surface and inside the machine. Cleaning the machine should be the first step in daily maintenance. Use a brush and compressed air to remove any debris from the machine’s surface and inside the machine.
Check the protective windows: Protective windows are used to protect the laser source from debris and damage. Check the condition of the protective windows and clean or replace them if necessary.
Inspect the nozzles: Nozzles are responsible for directing the laser beam onto the material being cut. Inspect the nozzles for any signs of wear and tear, and replace them if necessary.
Check the gas supply: Fiber laser cutting machines use gas to assist in the cutting process. Check the gas supply to make sure there are no leaks or restrictions.
Check the laser source: The laser source is the heart of the fiber laser cutting machine. Inspect the laser source for any signs of damage, such as cracks or chips. If you notice any damage, replace the laser source immediately.
Lubricate the machine: Fiber laser cutting machines have moving parts that require lubrication to function properly. Use a lubricant recommended by the manufacturer to lubricate the machine’s moving parts.
Calibrate the machine: Fiber laser cutting machines require calibration to ensure accurate cuts. Follow the manufacturer’s instructions to calibrate the machine daily.
In conclusion, proper daily maintenance of a fiber laser cutting machine is crucial for its longevity and accuracy. By following these steps, you can ensure that your fiber laser cutting machine operates correctly and safely. Remember to always refer to the manufacturer’s instructions for specific maintenance requirements.